Shenzhen Linx Technology Co., Ltd.

Home> Industry Information> There is no 3.5mm iPhone after the use of headphones and another solution - Lightning EarPods Bluetooth headset

There is no 3.5mm iPhone after the use of headphones and another solution - Lightning EarPods Bluetooth headset

June 24, 2020

I. Introduction


Since the iPhone has removed the 3.5mm interface, various solutions have emerged in the market.

Some manufacturers produce a variety of Bluetooth Headsets, some manufacturers produce adapters, and some manufacturers organically combine Lightning plugs and Bluetooth headsets.

When I heard this headset for the first time, I wondered if there was any way to power this headset. If you can external power supply, it is not able to get a super battery life Bluetooth headset?

Who knows, look and say it



▼ Take out headphones from bubble paper and use a plastic bag

▼ The packaging of the headset is almost the same as that of Apple’s original EarPods headset.

▼Printed apple LOGO on the back

▼ violent express, the side of the plastic shell cracked

▼ Open the transparent plastic shell, first of all is to fall out of the Lightning interface, hey, and those outside the glamorous 3.5mm interface is completely different Well, headphones and wire control lying quietly in the headphone box, did not fall out because of sudden Lightning connector feels a slight surprise

Third, the appearance


▼This Lightning connector works normally, the contacts are silver, and there is no glitter, which means there is no gold plating

▼ line control, volume + and volume - in the middle is the answer button

▼A small microphone logo is printed on the back

▼ Look at the headphone unit filter. There are two ducts below the metal filter.

▼Printed "L" on the side, followed by a vent

▼ The back of the unit also has a vent

▼ The vents at the bottom of the unit are not missing

▼ The total length of the headset is about 120cm

▼ come up with my Apple original EarPods headphones, you can see, Lightning connector earphones slightly longer, slightly yellow EarPods headphones, I have been very sorry, and spent for many years

▼3.5mm connector and Lightning interface, nothing to say

▼ Distribution points and wiring harness

▼ line control details are almost the same

▼ The microphone on the back looks pretty much the same

▼ unit details comparison, almost

▼Back vents

▼Bottom vents

▼ The vent holes on the bottom side look exactly the same, and the sound is exactly the same

▼The gap on the side of the unit

Fourth, trial


To plug in the Lightning connector on the ipad air2, turn on Bluetooth, and you can see a Bluetooth headset called “Lightning Earphone.” This name, weird, can be connected with just one click.

▼ Then open the battery plug on the left side of the main screen, you can see the power of the ipad air2 and Bluetooth headset, Bluetooth headset power directly shows 100%

▼ Unplug the Lightning plug of the headset, Bluetooth directly cut off, the headset power is gone, looks like the Bluetooth headset is pure external power supply

▼ Let's put out a “Freak” by Ronald Cheng who has been listening to this recently. Try to see what is the difference between this Bluetooth headset and Apple’s original EarPods headset. In fact, the appearance of the unit looks exactly the same, the sound is also similar, that is, the Bluetooth headset vocal more front, the analysis is almost a bit, the sound field is smaller, the bass's dive is almost the same, the overall trend is still similar. The comfort level is the same, the remote control button is slightly loose. The Bluetooth headset sounds louder, the daily volume of the two songs is almost the same, the same environment using EarPods headset requires 5,6 volume


V. Summary


1. In addition to the adapter and Bluetooth headset, there is a new solution, which is similar to the method used by Apple's original EarPods headset. It can be used by plugging in, Bluetooth is automatically connected, and it is unplugged when not in use. It is a pure Earphones with headphones, but the transmission of sound from the physical line to Bluetooth

2, the sound quality is slightly worse, but the sound is exactly the same, comfortable to wear, easy to use daily, and because there is no built-in battery, you do not need to consider the issue of battery life, the phone has electricity, headphones can be used. In the same way, since there is no built-in battery, it is completely impossible to unplug the cable. If it suddenly becomes ingenious, consider connecting a small power supply or changing the interface. Anyway, as long as the power supply is good

3, just the female ticket iphone 6plus mobile phone 3.5mm socket is broken, this headset is also a relatively good solution, repair a headset hole and buy this headset almost the price

thank you all!

END


The above is the There is no 3.5mm iPhone after the use of headphones and another solution - Lightning EarPods Bluetooth headset we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> There is no 3.5mm iPhone after the use of headphones and another solution - Lightning EarPods Bluetooth headset
Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send